Snow Blower

ECONOR


Specifications

MODELS
E-60 
E-72
E-86
Cutting width
60"
72"
86"
Cutting height 
26" 
27½"
33½"
Recom. H. power
16 - 25 
25 - 40
40 - 75
Impeller RPM
540
540
540
Impeller diameter 
20" 
22"
26"
Impeller shaft diameter 
1"
1¼"
1 9/16"
Impeller depth
7"
8"
11"
Number of blade
4
4
4
Main auger diameter
17"
17"
20"
Drive chain number
50
60
60
Number of safety bold
22
2
Bearing-Ductile I.C.
Std.
Std.
Std.
Cylinder size
2" x 4"    
2" x 4"   
2" x 4"
Length closed14¼"
14¼"
14¼"
Impeller center height
13½"
14½"
17¼"
Balanced impeller
Std.
Std.
Std.
Balanced auger
Std.
Std.
Std.
Carbon steel blade
Std.
Std.
Std.
Chute rotation manual
Opt.
Opt.
Opt.
Chute rotation hyd. cyl.        
Opt.
Opt.
Opt.
P.T.O. shaft number
2
4
6
Hitch category 
11
2
Weight (lb) approx.
470 lbs
540 lbs
915 lbs


  1. Chute rotation with steel cable and cylinder (optional)
  2. Manual chute rotation (optional)
  3. Perforated adjustable deflector by cylinder (optional)
  4. Adjustable deflector by cylinder (optional)
  5. Balanced auger and impeller
  6. High carbon steel cutting blade

NORMAND


Features

  • Chute rotation on polyethylene UHMW
  • Rotary drum with UHMW side on each side
  • Removable rotary drum
  • Hydraulic hoses holder
  • Reinforced blade support and sides
  • Reversible and replaceable carbon blade
  • Balance auger and impeller
  • Adjustable carbon steel skid shoes
  • Manual chute rotation 360°
  • Hydraulic cylinder chute rotation 270°
  • Hydraulic motor chute rotation with gear adjustable from 255° to 360°
  • Chute deflector with telescopic rod standard
  • Hydraulic chute deflector
  • Industrial and semi-industrial chute
  • 13" diameter upper auger on models N-92 and N-92TR
  • 17" diameter upper auger on models N-98, N-98TR, N-104, N-104TR
  • Bearing ductile iron casing on all models
  • 21 standard models from 54" to 104"
  • Quality paint with primer

The  "pull type" snowblower is made for a special use.

Contractors who care about efficiency and for a rapid clearing prefer this type of equipment.

A rear hydraulic blade made with polyethylene is offered as an option for a better cleaning and for the protection of different kind of pavement.


  • Chute rotation on polyethylene UHM to avoid friction and ice accumulation
  • Chute rotation with gear and hydraulic motor adjustable from 255° to 360°
  • Industrial chute with two deflectors
  • Standard chute
  • Chute deflector with telescopic rod
  • 48" extension with quick attach base
  • Chute rotation with steel cable and cylinder 270°
  • Hydraulic hoses holder
  • Adjustable carbon steel skid shoes
  • Removable rotary drum with two polyethylene UHMW bearings (front and back) for easy maintenance.